Skip to content

4× Lentivirus Concentrator Solution

Version 1.0LK, DDFirst posted Last updated

Concentration of lentiviral supernatant without ultracentrifugation, replacing commercial PEG-based reagents such as PEG-it. Used in Lentivirus preparation.

The recipe and the matching concentration protocol are those of the Functional Genomics Core at the University of Texas MD Anderson Cancer Center, published on their core facility resources page.

Component Stock concentration Amount for 200 ml Supplier (cat. no.)
PEG-8000 40 % (w/v) 80 g to be added
NaCl 1.2 M 14 g to be added
10× PBS, pH 7.4 1× 20 ml to be added
Milli-Q H2O 80 ml, then to 200 ml —
  1. Dissolve 80 g PEG-8000 and 14 g NaCl in 80 ml Milli-Q H2O and 20 ml 10× PBS (pH 7.4).
  2. Stir gently until the solids have dissolved; warm slightly if needed.
  3. Adjust the pH to 7.0–7.2.
  4. Bring the final volume to 200 ml with Milli-Q H2O.
  5. Sterilize by filtration through a 0.2 µm filter.

4 °C.

Add 1 volume of concentrator to 3 volumes of cleared viral supernatant, giving final concentrations of 10 % (w/v) PEG-8000 and 0.3 M NaCl. Incubate at 4 °C for at least 4 h (better overnight), then pellet at 1600 × g for 60 min at 4 °C. See Lentivirus preparation for the full procedure.

  1. MD Anderson Cancer Center, Functional Genomics Core. Homemade lentivirus concentrator and virus concentration protocol. Functional Genomics Core resources, accessed 2026-11-15.