Labeling & logging
Everything in the lab that is stored gets a short code. Plasmids have their own page: see Plasmids. The code identifies a thing, not where it is: locations are recorded separately, so a label stays valid when something moves.
Storage equipment
Section titled “Storage equipment”Each fridge and freezer has a code made of a two-letter prefix and a two-digit number.
| Prefix | Storage | Example |
|---|---|---|
| RF | Refrigerator, +4 °C | RF01 |
| FZ | Freezer, −20 °C | FZ01 |
| UL | Ultra-low freezer, −80 °C | UL01 |
| LN | Liquid nitrogen | (scheme to be decided, see below) |
The temperature is part of the prefix, so a box filed in the wrong kind of unit is visible at a glance.
Door label. Two lines: the code large on top, a short description below it.
UL01
Ultra-low freezer, −80 °C
The code is what people read and type, so it is the dominant element. The description tells a new person what they are looking at without opening the door. Labels are printed, not handwritten, and the adhesive must be rated for the unit (check this for −80 °C doors). We do not use barcodes on equipment.
Drawers and shelves. The label on the drawer says only the drawer number, for example D1, because the unit is already identified by its door. In the inventory the full location is written RF01-D1. Use one numbering direction everywhere. If a unit already has printed or embossed shelf numbers, use those.
Taking a unit out of service. Keep the old label on the unit, record the change, and note where the contents were moved.
Each box has its own ID, BX plus four digits (BX0001), with no location in it. Which freezer, drawer or shelf a box sits in is a separate record, so moving a box is a single edit and the label never changes.
How to log
Section titled “How to log”The lab inventory spreadsheet is kept outside the website. (Link to be added for lab members.)
A new box
Section titled “A new box”- Take the next free number from the box list and write it down as BX00xx.
- Print the label and attach it to the box.
- Add the box to the box list with its location, for example UL01-D2.
Moving a box
Section titled “Moving a box”Change the location of the box in the box list. Do not change anything on the vials or the box label.